GDI set of gold plated TELERODS, telescopic gold dowsing rods, including power module and a carry case with foam inserts. These rods are the most affordable gold detectors, a popular and remarkable dowser tool, used for gold dowsing      and water dowsing. The proper technique for dowsing – radiesthesia requires      the dowser to hold with the dowsing rods, a sample of the same kind of metal he wishes to locate.

That is reason why the TELERODS are gold plated. This way a sample is not necessary anymore when searching for gold, and reliable results are reported.  Also gold by nature does not suffer oxidation from human skin PH, and provides better electrical contact between the L rods and the user himself.

The dowsing L rods must be very sensitive in rotation, therefore not to suffer from friction, this is achieved with periodic lubrication. Our dowsing rods are fitted with a rubber cover protector against dirt, lift the cover and spray grease through       the lubrication hole, found at the top and bottom side of the handle. For a smooth movement both L rods have a stabilization weight on their tip. During operation the dowsing rods are hold slightly declined and will be crossing themselves when attracted by the energy line towards the target.

Now mark the direction and a second reading should be taken about 15 meters away, to determine target location, by triangulation of the 2 readings.                    Start walking towards the target and L rods stay crossed, when the target has been passed, L rods open and rotate backwards. At this point the rods can be retracted for a more accurate target centering. After the object is centered, the depth can  be measured.

The rods operate either standalone even from amateur dowsers, or can be coupled with long range locators, dowsing instruments, frequency generators, and MFD molecular frequency gold detectors. They are an excellent upgrade for old dowsing locators with poor quality or worn out antenna rods.