GDI set gold dowsing L rods. The most affordable gold detectors, a popular and remarkable dowser tool, used for gold dowsing and water dowsing. The proper technique for dowsing – radiesthesia requires the dowser to hold with the dowsing rods, a sample of the same kind of metal he wishes to locate. That is reason the L rods are gold plated. This way a sample is not necessary anymore when searching for gold, and reliable results are reported. Also gold by nature does not suffer oxidation from human skin PH, and provides better electrical contact between the L rods and the user himself. The dowsing L rods must be very sensitive in rotation, therefore not to suffer from friction, this is achieved with periodic lubrication. Our dowsing rods are fitted with a rubber cover protector against dirt, lift the cover and spray grease through the lubrication hole, found at the top and bottom side of the handle. For a smooth movement both L rods have a stabilization weight on their tip.
During operation the dowsing rods are hold slightly declined, and will be crossing themselves when attracted by the energy line towards the target. Now mark the direction and a second reading should be taken about 15 meters away, to determine target location, by triangulation of the 2 readings. Start walking towards the target and L rods stay crossed, when the target has been passed, L rods open and rotate backwards. After the object is centered, the depth can be measured. The rods operate either standalone even from amateur dowsers, or can be coupled with long range locators, dowsing instruments, frequency generators, and MFD molecular frequency gold detectors. They are an excellent upgrade for old dowsing locators with poor quality or worn out antenna rods

GDI set gold dowsing L rods designed with lubrication ability for long lasting – trouble free operation

L Dowsing Rods (receiver)
The dowsing rods are powered by the amplifier, they are 45 cm long and plated with a special gold layer that is not suffering oxidation from the human skin PH. The purpose of the rods is to indicate to the operator that he has faced the energy line between the user and the target. The dowsing antennas are normally held steady and balanced at waist level, and slightly declined in front of the operator. They are held pointed in a forward direction parallel to each other, at a distance of 20 to 45 cm apart. What each individual needs to discover is just what distance best relates to themselves. This decision will be by trial and error. Please remember that an individual who is relaxed and calm will operate the dowsing antennas more successfully than one who is tense and rigid. The rods will cross naturally by themselves when you enter the target energy line.